mmaleschuk
Newbie
Hi,
I have a bulk loaded called a Restem. It looks like it may be a rebranded Alden.
The counter does not work. Can anyone tell me how many turns required to get 36 exposures?
Cheers,
Merlyn
I have a bulk loaded called a Restem. It looks like it may be a rebranded Alden.
The counter does not work. Can anyone tell me how many turns required to get 36 exposures?
Cheers,
Merlyn
sevo
Fokutorendaburando
There is no set number - minor differences in the diameter of the core and way you taped the film to it may add up to a difference of several turns by 36 frames. A good method with non-counting loaders is to load the cartridge to completion (until the film starts binding in the shell) and pull the leader entirely from the cartridge, not the loader - that will give you as many frames as possible, around 38-39 exposures, without straining the film too much. I used to get 41 out of Agfa/Ilford cartridges, with the film binding in the shell and the leader entirely outside.
__jc
Well-known
I've had my Restem since about 1982. Great loader. I don't worry about the counter, I just count the clicks - one click per frame.
Cheers, Phil
Cheers, Phil
Martin Carone Santos
Member
31 turns is a good starting point! When using the Lloyds I prefer to give 29 turns. - enough for 30 exposures.