Spider67
Well-known
Hi,
I already read that it can be done, but how?
When I put the flash on the camera (which is on "P") it works but the camera still takes a speed as if no flash is attached.
I am very thankful for pointers how to make that combination work.
Best regards
Des
I already read that it can be done, but how?
When I put the flash on the camera (which is on "P") it works but the camera still takes a speed as if no flash is attached.
I am very thankful for pointers how to make that combination work.
Best regards
Des
colyn
ישו משיח
The SB-15 is not compatible in P mode. Set to M and use it in manual settings..
Spider67
Well-known
Thanks colyn.
So it's basically setting the camera to M and using all the speeds up to 1/500?
So it's basically setting the camera to M and using all the speeds up to 1/500?
wjlapier
Well-known
I'd play with some different combos. Camera in M mode at f/4 or 5.6 and shutter speeds around 1/60-125. Flash in A mode and try either A1 or A2. I have the flash and use it on my GF1 as a bounce flash. Settings: ISO400, 1/60, f/4 and flash on A2. This works well as a bounced flash off my ceiling and lights up the front room pretty good.