twopointeight
Well-known
I have a Pen W that has some spacing problems in between frames. It could probably also use some new foam seals and a general CLA. I need a repair person who is familiar with the Pen half-frame and might have spare parts. My camera repair person already attempted this but didn't fix the problem. So, who's the man, (or woman)?
Al Kaplan
Veteran
For spare parts your best bet might be to locate a lightly used Pen, Pen S or perhaps even one of the EE models, and have your repair guy transplant the parts into your W. I'd think that the film advance mechanics would be the same. Nobody seems to want the EE models so it should be inexpensive.
gb hill
Veteran
I just fixed a sticky aperture in my ees2 last week & I used some info from this site. They have a repair forum which may be able to point you to the right place
http://www.kyphoto.com/classics/pen.html
http://www.kyphoto.com/classics/pen.html
VictorM.
Well-known
Al has the right idea, but you would be happier if you sold it to me for $50. 
aizan
Veteran
what al said. these are very, very simple cameras. you could swap the parts yourself.
Al Kaplan
Veteran
I sold my working but nearly completely without black paint Pen W a couple of years ago for over $400. DO NOT sell it for $50.00! It looked like crap but the lens was clean and it worked. Your W is worth fixing. It has the same insides as the Pen S.
ChrisN
Striving
VictorM.
Well-known
That was a joke.
Had I been serious, I would have offered to trade for an old Nikkormat. And I would have thrown in a new battery!twopointeight
Well-known
The irony is that I have two Pen W's. The battered one works perfectly. The other won with very low miles has the spacing problem. BTW, I have Olympus Zuiko enlarging lens made for 1/2 frame format. I might ask the repair shop that Chris recommended (thanks) if they can swap a transport from a more common Pen S, as Al suggested, (thanks again).