macmx
Established
I spent a week in Greenland, and brought among other cameras my MP.
Some of my exposures have weird lines on them which go vertically through the frame and vary in number and brightness. It does not seem to be consistent through a complete roll of film and some exposures from the film are just fine.
Also, some of the frames show half circular patterns at the top.
Can anyone tell me what caused these two things? I think maybe the vertical lines are on frames shot at medium slow shutter speeds like 1/60 and 1/30 but I cannot be completely sure. Mind you, the temperature was around -10 degrees centigrade.
Any help is much appreciated! Thanks.
View attachment 78260
View attachment 78259
Some of my exposures have weird lines on them which go vertically through the frame and vary in number and brightness. It does not seem to be consistent through a complete roll of film and some exposures from the film are just fine.
Also, some of the frames show half circular patterns at the top.
Can anyone tell me what caused these two things? I think maybe the vertical lines are on frames shot at medium slow shutter speeds like 1/60 and 1/30 but I cannot be completely sure. Mind you, the temperature was around -10 degrees centigrade.
Any help is much appreciated! Thanks.
View attachment 78260
View attachment 78259
xxloverxx
Shoot.
I think it's something to do with your film being so cold that it's starting to get stiff.
le vrai rdu
Well-known
weird stuff
Tim Gray
Well-known
No idea. Shutter problem?
Do the half circle bits look like crescents? If so, it could be from stressing the film during loading or something.
Do the half circle bits look like crescents? If so, it could be from stressing the film during loading or something.
macmx
Established
Thanks for the ideas.
The weird thing is that the exposures are dead on, so it doesn't seem like the shutter was stuck. The frames maintain their 2x3 ratio, so it doesn't seem like the film was stressed. And the lines do not extend outside the frame.
The weird thing is that the exposures are dead on, so it doesn't seem like the shutter was stuck. The frames maintain their 2x3 ratio, so it doesn't seem like the film was stressed. And the lines do not extend outside the frame.
It looks like light coming through the flip-up camera back. I would check the seals on it.
Benjamin Marks
Veteran
I'm with Brian -- either a light leak from the back door or a problem with the metal strip on the leading edge of the shutter curtain.
Ben Marks
Ben Marks