GeorgesGiralt
Established
Hi !
I've got this nice Isolette III with it's light tight bellows ! And the shutter was full of gunk. I cleaned everything in lighter fluid, but the shutter is really slow (2.2 seconds to the second...) I was prepared for this on the 1/300 but not for all slower speeds.
So I need a manual to learn how to improve things a bit and return this nice folding into use !
TIA
I've got this nice Isolette III with it's light tight bellows ! And the shutter was full of gunk. I cleaned everything in lighter fluid, but the shutter is really slow (2.2 seconds to the second...) I was prepared for this on the 1/300 but not for all slower speeds.
So I need a manual to learn how to improve things a bit and return this nice folding into use !
TIA
chippy
foo was here
Howdy,, we were just talking about this the other day,,)...a few posts back.....its a Gumby shutter ya got ;-)
see if this helpshttp://www.rangefinderforum.com/forums/showthread.php?t=57993
see if this helpshttp://www.rangefinderforum.com/forums/showthread.php?t=57993
Solinar
Analog Preferred
Daniel Mitchell has an illustrated web page specifically for the Prontor SVS.
Click Here
Roland Givan has a similar page, but it is for the older Prontor S.
http://www.rolandandcaroline.co.uk/repair/prontors1.html
Click Here
Roland Givan has a similar page, but it is for the older Prontor S.
http://www.rolandandcaroline.co.uk/repair/prontors1.html