pagpow
Well-known
Hi,
I've been looking at a Beseler Slide King, an old lantern slide projector that some folks use for projecting 120 trannies. Gepe 6x7 mounts and XPan mounts are 85X85 mm (OD). Two questions:
1) this will fit fine horizontally -- the gap is about 100mm, but what about vertically, where the gate does not clearly accommodate 85mm, particularly with any adapters that would raise the tranny (or does so just barely w/o an adapter)
2) what adapters, if any, have people used in the slide carriers with a gate opening of 100mm (horizontal) and a slide 85mm wide.
Experience? or pointers to sources of info?
Thanks.
I've been looking at a Beseler Slide King, an old lantern slide projector that some folks use for projecting 120 trannies. Gepe 6x7 mounts and XPan mounts are 85X85 mm (OD). Two questions:
1) this will fit fine horizontally -- the gap is about 100mm, but what about vertically, where the gate does not clearly accommodate 85mm, particularly with any adapters that would raise the tranny (or does so just barely w/o an adapter)
2) what adapters, if any, have people used in the slide carriers with a gate opening of 100mm (horizontal) and a slide 85mm wide.
Experience? or pointers to sources of info?
Thanks.