Braun paxette super II BL shutter speed CLA

[gi0rgi0ba]

Hello everybody
I have a Braun Paxette Super II BL, the shutter speed does not work properly in particular mode the lower speeds. So it needs to be cleaned. To open the Prontor-svs I proceed as follow:

1) remove the wind lever, the image shows how to reassemble the spring (using grease and tweezers it is possible to keep everything in position for reassembly)

https://www.flickr.com/photos/148743698@N02/50620385273/in/pool-braunpaxette/
https://www.flickr.com/photos/148743698@N02/50621232612/in/pool-braunpaxette/

2) remove the range finder
https://www.flickr.com/photos/148743698@N02/50621232577/in/pool-braunpaxette/
https://www.flickr.com/photos/148743698@N02/50621231932/in/pool-braunpaxette/

3) remove the rewind lever
https://www.flickr.com/photos/148743698@N02/50621232507/in/pool-braunpaxette/

4) remove the top plate
https://www.flickr.com/photos/148743698@N02/50620385048/in/pool-braunpaxette/

5) remove the bottom stuff and transporter engage film (screw #5 in the image below)
https://www.flickr.com/photos/148743698@N02/50620385348/in/pool-braunpaxette/
https://www.flickr.com/photos/148743698@N02/50621127556/in/pool-braunpaxette/
https://www.flickr.com/photos/148743698@N02/50621232357/in/pool-braunpaxette/

6) remove the screws 1,2,3,4 from the back
https://www.flickr.com/photos/148743698@N02/50608547511/in/pool-braunpaxette/
https://www.flickr.com/photos/148743698@N02/50621127111/in/pool-braunpaxette/

7) open the shutter prontor svs
https://www.flickr.com/photos/148743698@N02/50620384703/in/pool-braunpaxette/
https://www.flickr.com/photos/148743698@N02/50621126836/in/pool-braunpaxette/
https://www.flickr.com/photos/148743698@N02/50621231972/in/pool-braunpaxette/
https://www.flickr.com/photos/148743698@N02/50621231842/in/pool-braunpaxette/