Fraser
Well-known
Any recommendations for a coder pen, I'm using a sharpie at the moment but only lasts for a couple of days. I've read that some of the kits come with a Zebra MO-120-MC-BK but can't seem to find one anywhere.
Cheers.
Cheers.
Rob-F
Likes Leicas
Mine came with a Zebra. It only lasts for a couple of lens changes! I think I'll have to send in at least one or two of my widest lenses for permanent coding.
gfspencer
gfspencer
Send your lenses in to Leica and have them coded. Coding lasts a life time.Any recommendations for a coder pen, I'm using a sharpie at the moment but only lasts for a couple of days. I've read that some of the kits come with a Zebra MO-120-MC-BK but can't seem to find one anywhere.
Cheers.
rodl
Established
Send your lenses in to Leica and have them coded. Coding lasts a life time.
And costs $175 per lens.
Fraser
Well-known
Send your lenses in to Leica and have them coded. Coding lasts a life time.
I think I would rather do it manually than pay to have it done, 5 lenses £100 a lens maybe not.
jamato8
Corroding tank M9 35 ASPH
I use my lenses and don't get rid of them. I scratched the area that the coding shows when using the coding system, reapplied the pen and the black area remains no matter how many times the lens is taken off. So for the 75 dollars for the system, and a small file I already had, I have marked all my lenses and they show up just like I had spent 175 each.
SciAggie
Well-known
I shouldn't tell on myself - but I will. I saw this thread and thought of the Little Orphan Annie coder pin from A Christmas Story. "Don't forget to drink your Ovaltine"
250swb
Well-known
Use a Dremel. Yes, a Sharpie first to test that you have the correct code, then just make a slight indentation with a grinding tip. After the Dremel's cost (which is good for other jobs around the house) you can code all your lenses for free, or if you want the Solms treatment later it will only cost the same as it would anyway. Alternatively try some of the codable flanges available on Ebay and just swap the whole rear flange over, keeping your original intact.
Steve
Steve
fotomeow
name under my name
I shouldn't tell on myself - but I will. I saw this thread and thought of the Little Orphan Annie coder pin from A Christmas Story. "Don't forget to drink your Ovaltine"
LOL, yes, coding your M9 lenses is for adult kids, whereas the Little Orphan Annie decoder is for li'l kids: "Dont forget to spend another $$____ to code your Leica lens'".
gfspencer
gfspencer
How much do you spend on an M8 or M9? How much do you spend on a lens? I know $175 isn't cheap but neither is our equipment.And costs $175 per lens.
ayewing
Member
Lens coding
Lens coding
My Sharpie coding seems to last for several lens changes in Leica lenses and almost indefinitely on my Voigtlander 25mm - it has a groove on the flange so the marks do not wear off.
I had my Tele Elmarit 90mm coded by Malcolm Taylor when I sent it to him for servicing. He is cheaper and quicker than sending the lens to Solms.
Lens coding
I think I would rather do it manually than pay to have it done, 5 lenses £100 a lens maybe not.
My Sharpie coding seems to last for several lens changes in Leica lenses and almost indefinitely on my Voigtlander 25mm - it has a groove on the flange so the marks do not wear off.
I had my Tele Elmarit 90mm coded by Malcolm Taylor when I sent it to him for servicing. He is cheaper and quicker than sending the lens to Solms.
Share:
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.