Cpitch
Established
I thought this might be of interest to those of us
who like the idea of a leather half case
This case was made for the Agfa Sillete its a good
tight fit (remove tripod fitting) at very little cost £4
at camera fair ,these case has made significant
improvement on grip and comfort. Also they are widely
available
who like the idea of a leather half case
This case was made for the Agfa Sillete its a good
tight fit (remove tripod fitting) at very little cost £4
at camera fair ,these case has made significant
improvement on grip and comfort. Also they are widely
available
Attachments
zuikologist
.........................
Thank you for the heads up. I have the original case for my CC but it is crumbling.
ARCHIVIST
Well-known
Be careful of original leather shoulder straps on these old cases - they are notorious for snapping due to age / wear !
You might wish to cut off the old strap and replace it with a more modern one. Use the existing fitted case 'D' rings of course.
Regards
Peter
You might wish to cut off the old strap and replace it with a more modern one. Use the existing fitted case 'D' rings of course.
Regards
Peter
Cpitch
Established
Hi
Thanks for the advise.I have replaced the main section
it looks very sound
regards
Thanks for the advise.I have replaced the main section
it looks very sound
regards
NickTrop
Veteran
Sharp. My case is in "okay for now" shape. But what metal lens hood are you using. The CC is really starting to grow on me. Been using it more often since I gave away my GSN.
Cpitch
Established
Hi Nick
I cheated Nikon Fit 52mm cut down short to miss
the RF patch,and then sprayed with matt black aerosol.
Please note I got into Yashica RF after reading YOUR posts
Regards
chris
I cheated Nikon Fit 52mm cut down short to miss
the RF patch,and then sprayed with matt black aerosol.
Please note I got into Yashica RF after reading YOUR posts
Regards
chris