ncc1701
Established
I have found this for the G1, It works
But anything out there for the GF1?:
1. Switch off camera
2. Switch to Single Shot Mode
3. Press "Film Mode" and "Display" together, hold these
4. Switch on camera, release the buttons after a short while.
5. Press "Menu/Set" and "left arrow" together, hold them, ignore the display
6. In addition(!) press 2 times "Film Mode"
Now you should see the history of problems with date and a code, up to 16 items.
7. Press "Menu/Set" and "left arrow" together once again and hold them
8. another additional press on "Film Mode" and you see a screen with 3 counters:
No.:
PWRCNT: counts the "switch on's"
SHTCNT: counts use of the shutter
Do No's. 7 and 8 again and it will bring you back to normal operation.
But anything out there for the GF1?:
1. Switch off camera
2. Switch to Single Shot Mode
3. Press "Film Mode" and "Display" together, hold these
4. Switch on camera, release the buttons after a short while.
5. Press "Menu/Set" and "left arrow" together, hold them, ignore the display
6. In addition(!) press 2 times "Film Mode"
Now you should see the history of problems with date and a code, up to 16 items.
7. Press "Menu/Set" and "left arrow" together once again and hold them
8. another additional press on "Film Mode" and you see a screen with 3 counters:
No.:
PWRCNT: counts the "switch on's"
SHTCNT: counts use of the shutter
Do No's. 7 and 8 again and it will bring you back to normal operation.
