m8 serial number help...

emraphoto

emraphoto

Veteran
Local time
11:54 AM
Joined
Oct 20, 2005
Messages
3,773
hi folks
still on the hunt for the elusive m8 deal here... i was wondering, what sort of serial numbers should i be avoiding in my quest? i know the first run had some issues and i was hoping to avoid these. can anyone enlighten me as to how the serial number translates?
cheers
john
 
You should be fine with that series of serial numbers. Mine begins with that set and has been trouble free since day one. But I wouldn't worry. Check the camera out thoroughly and update or make sure the firmware has been updated.
 
It shouldn't matter. AFAIK, there have been no physical changes to the camera since its introduction. The only changes I am aware of for certain have been in the firmware.
 
Hi,
emraphoto said:
in particular i'm looking at one that starts 310XXXX
Click to expand...
Those are from the first batch.
I have one (# 31014xx) which was refurbished in Solms.
No particular problems i can say, and i also can compare with a more recent # 3329xxx.
To know if it was refurbished: Have a look at the warranty card.
A red mark (a zero here) shows it has been in Solms.
 
emraphoto said:
in particulair i'm looking at one that starts 310XXXX
Click to expand...

I had three consecutive sudden deaths last January and February with M8s that had 310xxxx serial numbers. The one I have had since March with no problems is 332xxxx.
 
Last edited:
BillBlackwell said:
It shouldn't matter. AFAIK, there have been no physical changes to the camera since its introduction.
Click to expand...
Firmware are not physical. ;)
Yes, some changes have been made, especially to the first batch, that's why some body (like mine) are called "refurbished".
AFAIK, we are on the 3rd. change by main board now, even very small and not particular for the last 2 changes, from the original 1st. production row.
 
Last edited:
Philippe D. said:
... AFAIK, we are on the 3rd. change by main board now, even very small and not particular for the last 2 changes, from the original 1st. production row.
Click to expand...

I also got into my M8 with a purchase of a refurb. It was anything but trouble free... in any case, it was indicated to me that the camera had been gone over, cleaned, and repackaged - that's it.

I know the M7 has gone through circuit board changes (at least one), but I am not so certain about the M8.

I am not saying you're wrong, but just restating what has been my understanding; that is, all internal and functional changes to the M8 have been with firmware upgrades.
 
BillBlackwell said:
I also got into my M8 with a purchase of a refurb. It was anything but trouble free... in any case, it was indicated to me that the camera had been gone over, cleaned, and repackaged - that's it.
Click to expand...
Leica never tell you what truly happen to your equipment when at factory repair shop.
And especially not when the Leica legendary quality is put into question.
 
Philippe:

I just had an email exchange with Tony Rose (Popflash) who says he doesn't really know, but also indicated he has sent into Leica some early M8s that have come back with new sensors and circuit boards. This casts some doubt on my earlier assertion. So I should alter to my earlier statement with, "be sure to get one with a warranty!"

Regards, Bill
 
thanx folks! i read all this and decided one of the kurland demo's had my name on it. the price was right and i have a warranty should i happen to need one!
now i'm going to the curb to wait for the delivery driver for a few days...
 
Mine has a serial number starting with 310 and it is not of the earliest batch that needed to be altered at the factory.

/Erik
 
jaapv said:
3100001 through 3101500 need to have their hardwareupgraded for banding, green blobs and beam-me-up-Scotty banding, if that has not been done already.
Click to expand...

sorry jaapv,

that´s not right.
Mine is higher (not really much) 3102xxx, but M8 was fixt from Solms
 
i just bought one with series 3109XXX and its on the way from USA, will it has any problem with that series number? it marked as new and unused but the series number has been registered. i'm worry there might have some faulty after reading this thread.
 
f 1 said:
sorry jaapv,

that´s not right.
Mine is higher (not really much) 3102xxx, but M8 was fixt from Solms
Click to expand...

Those, up to about 3106000 need the T2 upgrade to avoid sudden death, which was caused by a faulty transitor, of which a few slipped into a batch. Most have had it, as Leica do that as routine. But they do not need the extra mass connection that the earlier series needed.
 
You must log in or register to reply here.
Back
Top Bottom