gigarcia
Newbie
gigarcia
Newbie
jrose125
Established
Original Sensor or is it a factory replacement? The original sensors are known for crapping out, which is why Leica offered free replacements for a number of years.
I hate to say it, but I think your sensor has gone bad - no shutter issue will create multi-colored lines like that.
I hate to say it, but I think your sensor has gone bad - no shutter issue will create multi-colored lines like that.
gigarcia
Newbie
Yes my M9 has an original sensor and very few actuations around 600
I use more my m4/p and my M8
I think I should send it to Service to Leica Repair at NJ
I use more my m4/p and my M8
I think I should send it to Service to Leica Repair at NJ
raid
Dad Photographer
Ouch! This may set you back $1000 or more.
Huss
Veteran
Ouch! This may set you back $1000 or more.
$1650 + tax and shipping.
raid
Dad Photographer
This is bad news indeed.
albertospa
Established
It looks like a writing error. Try changing the card.
You can also take pictures without a card and see how the photo looks on the camera display. If the problem still occurs, then it depends on the sensor.
You can also take pictures without a card and see how the photo looks on the camera display. If the problem still occurs, then it depends on the sensor.
gigarcia
Newbie
Thank you I will try that
Thank you I will try that
Thank you I will try to take the pic without SD and with a new SD card.
This was the first picture taken with problems, Last Summer used the camera in Cancun Mexico and was working nice with a Summulix 50 1.4F
Thank you I will try that
Thank you I will try to take the pic without SD and with a new SD card.
This was the first picture taken with problems, Last Summer used the camera in Cancun Mexico and was working nice with a Summulix 50 1.4F
gigarcia
Newbie
Ko.Fe.
Lenses 35/21 Gears 46/20
I have seen it at LUF recently.
https://www.l-camera-forum.com/topic/304224-m9-issue/
https://www.l-camera-forum.com/topic/304748-bandingsensor-issues/
https://www.l-camera-forum.com/topic/304224-m9-issue/
https://www.l-camera-forum.com/topic/304748-bandingsensor-issues/
gigarcia
Newbie
Dear Ko.Fe
This looks like the same problem as mine
Thank You
This looks like the same problem as mine
Thank You
Rob-F
Likes Leicas
The same thing happened to my Digilux 2. Leica replaced the sensor.
f.hayek
Well-known
Time to move on from the M9, kids.
It's 2020!!
It's 2020!!
jarski
Veteran
here is the photo
Looks like ufo is landing. You should be happy about that photo
Rob-F
Likes Leicas
Time to move on from the M9, kids.
It's 2020!!
No, I will stick with mine. I'm comfortable with it. Sure, it's 2020, but some of us keep our Barnacks in good condition for when we want to use them!
35photo
Well-known
Sensor corrosion... I had a same exact thing happen to mine.... I had my repaired for free... Looks like they stopped covering it... too bad
Richard G
Veteran
This looks to be an electronics problem. Might need sensor replacement, but may be a simpler software reprogramming or a different electronic problem. This doesn’t look like the moisture related sensor rot.
Share:
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.