Omega D5-XL Baseboard

[Desmocrat]

Hello all, I am in need of an Omega D5-XL baseboard. I only have a wall mount which I can't use (according to the wife), so I need a baseboard. I've talked to the company and they still have baseboards for the D-5500, which may be the same thing as the dimensions are the same, but mounting holes may or may not match with the D5. I you could verify that the mounting holes are the same or if you know of a source for D5 baseboards, please let me know.

 

[Vince Lupo]

Would this work?

http://www.ebay.com/itm/Chromega-D4...74b94d9&pid=100005&rk=6&rkt=6&sd=112341977817

Found this guy too: http://www.glennview.com/index.htm

Do you have the mounting plate? If so, could you not just use a really thick piece of wood with four rubber feet underneath and drill your own mounting holes?

 

[x-ray]

I think I have a spare mounting plate if you need one. PM I'd you do.

 

[BLKRCAT]

this lady was selling a pair of D5's a few months ago in toronto. I have an Omega baseboard sitting out waiting to go to the trash but its an 11x14 one from a small chromega enlarger. I'm not sure if that would help you.

 

[Pablito]

I used a butcher block cutting board, custom cut at a restaurant supply place.

 

[Ko.Fe.]

If you can't attach it to the wall, attach it to enforced L shaped DIY baseboard/"wall".
D5-XL baseboard is 34 inches deep (and doesn't fit on regular countertop).

 

[Desmocrat]

Thanks for all of the replies. I've been working out of town and didn't see these until today. I did locate a baseboard.

 

[MISH]

If you live near northern Indiana I have a D5500 board for you


Sent from my iPhone using Tapatalk

 

[Desmocrat]

Again thanks, My D5 is mounted to a new baseboard. The wall mount had the regular baseboard mounting plate as part of it, I just had to buy some longer bolts.