Leica LTM What kind of Leica is this, standard?

Leica M39 screw mount bodies/lenses
micromoogman

micromoogman

Well-known
Local time
7:49 AM
Joined
Feb 18, 2006
Messages
440
I Just bought a Leica cheap but have no idea what it is. Is it a I or standard series? And how about that deleted low speed knob? Serial no.205541

Thanks
 

Attachments

  • 0408.JPG
    0408.JPG
    43.4 KB · Views: 0
Been to an auction today, eh? ;) The description says it's a Standard, but with a IIc top. The serial number designates it as a Leica I according to the official list. I am no expert, so I am intrigued by how and why it looks like it does.
 
Last edited:
yup :)
I thought it might be that rare standard e from 1947-50 with the IIIc body...the serial no does not match however.
 
Last edited:
What serial does the lens have?

The body outer does look like the '47-49 but that may have been fitted during repair by leitz, they ued cameras then, if it was broke they had spare parts.

Noel
 
'36 then, if it was sold with the body, 205541 should also have been a '36 leica 1 (or a standard), but ELeitz may have had other problems in '36. So you may very well have a '36.

Noel

P.S. sorry double post
 
it looks like a Leica standard made up from the chassis of the Leica III/ IIIa, so a buyer had a less expensive camera that could be upgraded at a later date if the owner chose to to that.
 
Only the III series had the slow-speed dial, so it would not have been "deleted" on a Standard. But the viewfinder on there does look like the Standard or at least an early model.

This may be another case of what was fairly common in those days - the factory would upgrade an older camera to a more recent "vintage". I'm not aware that was ever done on the M series models. Anyone have different evidence?
 
A '36 standard might not have had the blanking plate, in '36.

They would convert two stroke to single, & ground notches in lenses for M5, if you requested during a service.

I'd imaging they would fit the finder enhancement today?

Noel
 
Leica III converted to a Ic with a standard viewfinder is what it looks like to me..
 
My serial# listings in Rogliatti and in the Hove Collectors Books Leica Pocket Manual list this serial# as a Standard from 1936. The fixed in place viewfinder, and only one accessory shoe, distinguishes it from the 1c which has two accessory shoes. The slow speed dial is not so much deleted as not added. Many Leicas have a blank cover where the slow-speed dial can be installed during a factory upgrade. An interesting detail is that the slow speed dial cover illustrated for the Standard in Rogliatti is of plain metal, where yours is decorated with a vulcanite circle. Lager's illustration shows a standard with no slow-speed dial cover at all. The Hove Pocket Guide is the same way.
 
page 22 of the Leica Illustrated Guide by James Lager mentions that:
" Leica Standards made in 1947 -48 were constructed on a series III
Leica chassis with the slow speed dial covered up by a vulcanite patch or metal plate."

the serial no. of this camera is from the mid 1930s though.
 
If you are still interested....this camera looks like a Standard made by Leica New York.

Except the lens (not a Wollensack), the serial number...

Good catch.
 
To me it looks like a Ic or something?? Very similar to the I but with the interchangeable mount and everything.

My Leica Standard has no slow speed circle. It has strap lugs - just for the record (fao david ;) )
 
You must log in or register to reply here.
Back
Top Bottom