hexar af, neopan 100ss, d76, epson scans

[ampguy]

contrast is pretty high, these used unsharp mask at medium:

here

 

[sam_m]

Nice set of pictures, what happened to the edges of some of them?

 

[ampguy]

bad rolling on the reel

bad rolling on the reel

need to practice rolling the film on the ss reels a little better. Thanks.

Nice set of pictures, what happened to the edges of some of them?

 

[amateriat]

Some interesting stuff here. Although it's possibly a bit hard to tell from the size of the images, I think you might be hitting the USM a bit too hard with these scans. Keep on keepin' on!


- Barrett

 

[ampguy]

Thanks Barrett

Thanks Barrett

Yes, I know what you mean. I applied sharpening to the whole set in bulk, manually I probably should have only to 30% or so.

Here's a set of similar film/dev, but LOW USM during scanning, and selective sharpening in pp: here

but the subject matter, lighting, and distances are different and the developing was done at a different temp., possibly affecting the contrast which are lower in this LOW scanning USM roll.

Some interesting stuff here. Although it's possibly a bit hard to tell from the size of the images, I think you might be hitting the USM a bit too hard with these scans. Keep on keepin' on!


- Barrett

 

[amateriat]

These certainly benefit from backing off USM.

Of course, the thing to remember is to enjoy the process while sorting the technical stuff out...as it looks like you're doing. 🙂


- Barrett