Jupiter-9 pics on film only

[Sonnar Brian]

I've had to file down the mount of some J-9's to get them to fit on a Contax camera, and on adapters. I've also filed the bezel that fits over the mount before.

I use my J-9s, but on Digital these days. The best is a KMZ with an adapter, focuses across range on the M9.

 

[Coldkennels]

I've had to file down the mount of some J-9's to get them to fit on a Contax camera, and on adapters. I've also filed the bezel that fits over the mount before.

What's the best way to figure out the "high point"? It can only be out by a fraction of a millimetre, but god only knows where.

 

[Sonnar Brian]

True- for the collar- I carefully placed on my beater Nikon S2 and could see where it hit the name place. Took the collar off, file- and repeat until it cleared. The bayonet mount itself- carefully position and inspect which hung up. I have a modified J-12, will get some pictures up- will be getting some time freed up next week.

 

[lohrentz]

> It seems to loose all contrast at the drop of a hat, and I get way more duds with it than just about any other lens I own. But when it does well, it shines.
Just a suggestion: check the Black Paint used on internal glass elements that it has not flaked off. This happened to my 8.5cm F2 Sonnar. I used a Sharpie to blacken the exposed surfaces, solved the problem. I also use a very deep shade on it and the J-9.

But not this one-

On the Canon 7.
View attachment 4827472

Where on the lens would you potentially see flaked black paint?

 

[Sonnar Brian]

This is the black paint that is on the sides of the glass of the optical groups. Use a flashlight to check the inner elements. If you see white/mottled areas, the paint may have separated on is not doing it's job. Light coming in off-angle gets reflected onto the image.

 

[Sanug]

Canon 7s, Jupiter-9. Kentmere 100@200, Adox XT-3, 1+2, 16 Min.
Scan from the silver gelatine prints.

 

[Sanug]

Statues in Duesseldorf.


Canon 7s, Jupiter-9, Kentmere 100@200, Adox XT-3, 1+1, 12 min.
Flatbed scan from print on Fotoimpex Easy Print RC.

 

[Brambling]

test frame, part of stereo filming for viewing 3D slides
Kiev 2A, Jupiter 9, Svema KN1 (as 16 Units from 1972 made in), exposed 2019

 

[Joao]

FED-5, Jupiter-9, yellow filter. Eastman plus-X in HC110

Two boats by João Avelar, on Flickr



Hull cleaning by João Avelar, on Flickr

 

[Joao]

FED 5, Jupiter 9, Eastman plus-X, HC110

Fishing by João Avelar, on Flickr

 

[Sanug]

In Duesseldorf.



Canon 7s, Jupiter-9 2/85
Bergger Pancro, Adox XT-3 stock, 10 min.
Silver gelatine print

 

[Mark240590]

1964 Lens on Zenit 1 Body. Rollei Retro 400S

 

[Brambling]

Zenit 1 Body

😳👍
I like this!!!
Once I bought a Zenit 1 at a flea market - I took it straight from a puddle of water - I had to completely restore it, it worked!
Jupiter - 9 mirror (no difference - black or white) until 1970-71 had an M39 mount, then - M42 and a slightly different frame design externally.

 

[Brambling]

in the pictures there are several Jupiter 9 and Nikkor 85

 

[Brambling]

my favorite pot! 🙂

FED 2, JUPITER 9 - 85MM F/2, film no memory, exposed 2015

 

[Brambling]

FED 2, JUPITER 9 - 85MM F/2, discolored, exposed 2015

 

[Sanug]

Canon 7s, Jupiter-9
Kentmere 100, ISO 400
Adox XT-3, 1+1, 16 Min.
Plustek Opticfilm 7300

 

[Sanug]

Canon 7s, Jupiter-9
Kentmere 100, ISO 400
Adox XT-3, 1+1, 16 Min.
Plustek Opticfilm 7300

 

[Mark240590]

Right. That’s it.

I’m taking my Jupiter 9 adapter to a Pentax ME Super away with me this weekend

 

[boojum]

leica m2, foma 200, d76 1+1

It's a sick society which tortures animals for its amusement.