40/1.4 on the cl, a hood question

back alley

back alley

IMAGES
Local time
9:41 AM
Joined
Jul 30, 2003
Messages
41,289
i must be going blind or something.
i just noticed that the hood for the 40 is darkening the lower almost half of the focusing patch.
i'm not sure how i could have missed that before and am wondering if something is up.
no hood - no problem...
for those with this combo does your hood interfere also?

joe
 
back alley said:
i must be going blind or something.
i just noticed that the hood for the 40 is darkening the lower almost half of the focusing patch.
i'm not sure how i could have missed that before and am wondering if something is up.
no hood - no problem...
for those with this combo does your hood interfere also?

joe
Click to expand...

If you move you eye slightly up, or pull the camera slightly down, the shadow will go away. :)
 
i just tried that w/o success.

but i also just discovered it's when the lens is focused at the nearest distance and not at the furthest.
it happens when the frame shifts for parallax correction.
guess i don't do much close up work :)

thanks.
 
back alley said:
i just tried that w/o success.

but i also just discovered it's when the lens is focused at the nearest distance and not at the furthest.
it happens when the frame shifts for parallax correction.
guess i don't do much close up work :)

thanks.
Click to expand...

When I close focus I have the same problem that you described. I just replaced the CV Hood with a 43 mm screw on hood that I purchased on ebay from heavystar and it solved the problem. :D
 
Last edited:
Andrew Touchon said:
When I close focus I have the same problem that you described. I just replaced the CV Hood with a 43 mm screw on hood that I purchased on ebay from heavystar and it solved the problem. :D
Click to expand...


the hood that trims inward at the peak?
joe
 
Andrew Touchon said:
No it has straight sides.
Click to expand...

ok, that's the one i saw on ebay.
maybe, i'll get that one. i don't really like the cv one. it feels like it's gonna break the end of the lens off every time i take it off. (not very often) seems a poor fit.
joe
 
back alley said:
ok, that's the one i saw on ebay.
maybe, i'll get that one. i don't really like the cv one. it feels like it's gonna break the end of the lens off every time i take it off. (not very often) seems a poor fit.
joe
Click to expand...

My CV hood is a poor fit also. It is a very loose fit and too easy to take off the lens. I was afraid it was going to fall off so I bought the screw in hood. Its too bad that Consina made such a crappy hood for an otherwise high quality lens. :mad:
 
Andrew Touchon said:
My CV hood is a poor fit also. It is a very loose fit and too easy to take off the lens. I was afraid it was going to fall off so I bought the screw in hood. Its too bad that Consina made such a crappy hood for an otherwise high quality lens. :mad:
Click to expand...

funny, yours is loose and mine is too tight.
maybe we should trade and see if they fit better;)
joe
 
back alley said:
be fun to try but i need to wait till the heavystar gets here.
guess i should go and order it then...

joe
Click to expand...

If your serious send me your mailing address now and I will go ahead and mail you my hood and you can mail your hood to me whenever your ready. I'm in no hurry.
 
i just read in another thread that the cv hood fits my zeiss 35 and 50 lens so i gave it a try.
and it fits great and just slid right on very smoothly. it fits both zm lens great. and when i put it back on the 40 it slid right on, very smoothly.
that's some kinda strange.
when i get the heavystar for the 40 i think i'll transfer the cv hood to the zm lens that is missing a hood.

joe
 
back alley said:
i just read in another thread that the cv hood fits my zeiss 35 and 50 lens so i gave it a try.
and it fits great and just slid right on very smoothly. it fits both zm lens great. and when i put it back on the 40 it slid right on, very smoothly.
that's some kinda strange.
when i get the heavystar for the 40 i think i'll transfer the cv hood to the zm lens that is missing a hood.

joe
Click to expand...

I just inspected my CV hood and discovered that it has a very small metal pin in one of mounting grooves that was stopping the hood from locking in place. I put it back on the lens and twisted it extremely hard and it clicked in place. After working it on and off a few times it has gotten a little bit easier to put on and off. However, It still requires an awful lot of torque.
 
we discovered something good tonight!!

i just ordered the heavystar which i'll use on the cv 40 & cl combo and use the cv hood on my 35 or 50 zm lens. when i bought the 50 i did not order a hood thinking i could transfer the one i already had. but for 20 bucks delivered the heavystar is perfect.

it's a good night.
joe
 
I too just ordered the 43mm HeavyStar vented hood for my 1.4/40, reminded that I needed one and that the CV hood is said to interfere with the CLE viewfinder... Good thread!
 
You must log in or register to reply here.
Back
Top Bottom