A7r with RF glass

Lss said:
It reads there is edge smearing until stopped down to f/11. That's rather disappointing.
Click to expand...

That's what most anticipated, frankly. The very small WAs 28 and wider are iffy on the edges, though it does vary.

The surprise is that the f/11 shots don't look like the normal diffracted F/11, they retain good sharpness.

Basically below 35mm you have to be very picky if you want reliable edges above f/8.

Speculation is that the glass above the sensor is not as thin as we'd prefer.

I have high hopes for my v3 28 elmarit though :)
 
Also, does anyone know if its safe to use the 50/2.0 DR, and 50/2.8 elmar collapsible. And is it safe to collapse the lense into the A7R body? or will it hit the sensor or camera internals?
 
uhoh7 said:
That's what most anticipated, frankly. The very small WAs 28 and wider are iffy on the edges, though it does vary.
Click to expand...
Absolutely. But it is still a bad outcome. Some of the problems you can deal with, loss of detail is a bigger problem.

Of course, we are still only reading a comment here. I am waiting for a thorough test.
 
You must log in or register to reply here.
Back
Top Bottom