Anyone use SPUR Orthopan UR (= ADOX CMS 20) ?

[colinh]

Has anyone else tried this film?

I just developed a roll again - and it looks good! It's drying just now, so no scans till tomorrow.

It was used by Zeiss to test their Biogon 25/2.8 ZM setting a resolution "record".

You can scan it at 5400 dpi and not notice the grain. 🙂

It is admittedly not as fast as HP5 etc, so it's not much good for night shots, but in normal daylight it's fine.

colin

 

[sepiareverb]

I've got some exposed but haven't been in the dark enough lately to get it run- what was your time/temp/dilution combo?

 

[colinh]

I've got some exposed but haven't been in the dark enough lately to get it run- what was your time/temp/dilution combo?

I develop according to the datasheet:

Using SPUR Nanospeed UR, 10 + 240 ml (250 ml covers the spiral in my JOBO tank)
20 °C 5 1/2 min. constant agitation the first 30 s, then once every 30 s.

Ilford Stopbath

only 60 s of fixing (in Ilford fixer)

I seem to remember, it's good to get the lid on quickly and start inverting as soon as you can.

Good luck.

colin