Do you use an Autopole on your TLR?

johnny9fingers

Well-known
Local time
8:09 AM
Joined
Aug 15, 2005
Messages
341
I am considering finding an Autopole for my Rolleiflex 3.5 B Automat MX-EVS.
Are they a useful tool, and how often would someone use it?
Thanks,
John
 
It is a polarizing filter for TLR cameras with Bayonet I (Rolleicords, Rolleiflex T, Yashica 124, Minolta Autocord) that allows you to see the effects of the polarization through the viewing lens.

Look here for example: Autopole on Flickr
 
Or you can just buy a Bay I polarizing
filter. Figure out the proper orientation
by holding it up to the viewing lens and
turning it until you get the desired effect,
and then mount the lens onto the taking
lens. The Rolleipol filter rotates in its
mount to facilitate this.

A lot of older Rolleipols have delaminated.
you can buy one for $10 on eBay and then
replace the glass with a Tiffen or Hoya
filter.
 
I have one of these for a Zeiss Ikon Ikoflex TLR. It's called an Ikopol (appropriately enough).

The Ikopol slips over both lenses. The filters are connected to each other by serrated rings, and you rotate the upper filter as you peer into the viewfinder. What you see in TLR viewfinder should reflect the polarization effect that is recorded on the film.

I haven't yet tried mine, but I have some Kodak Ektar so I will give it a go this week. As soon as it stop raining!
 
Last edited:
I don't know about the Franke & Heidecke Autopole but for my Ikoflex i have a clamp-on Ikopol which does the same trick. Works great for taking away reflections (more saturated colors) or darkening parts of the blue sky on sunny days.

3620322294_f0e2287dcd_m.jpg
 
Back
Top Bottom