FalseDigital
BKK -> Tokyo
I tried searching for this everywhere (including here) and I'm wondering if anyone has done/knows anyone who has mounted a 4mm or 6mm lens onto an EP-1?
I'm curious to know the results...especially since these lenses are usually dirt cheap. So if you've done it and got some sample images please post em!
I'm curious to know the results...especially since these lenses are usually dirt cheap. So if you've done it and got some sample images please post em!
Pat Donnelly
Member
6.5mm lens any good?
6.5mm lens any good?
The keyboard is on my knee and the old 80cm CRT TV is less than a metre away from the camera mos. The walls are all plumb and orthogonal, so the lens may have a slight amount of distortion....
If I had any shame left, I would correct for the tungsten light ....
6.5mm lens any good?
The keyboard is on my knee and the old 80cm CRT TV is less than a metre away from the camera mos. The walls are all plumb and orthogonal, so the lens may have a slight amount of distortion....
If I had any shame left, I would correct for the tungsten light ....
Pat Donnelly
Member
This was not cheap, more middling.
Finder
Veteran
The two lens you are interested it will not have a large enough image circle to cover the m4/3 sensor. Even worse then this 12mm c-mount lens:
http://e-p1.net/index.php?topic=2122.0
http://e-p1.net/index.php?topic=2122.0
FalseDigital
BKK -> Tokyo
I assumed they wouldn't cover the full sensor from the beginning but I wasn't sure how much they did. Thanks for that link.
Any other links of C-Mount experiments you'd like to share?
Any other links of C-Mount experiments you'd like to share?