G
Guest
Guest
Just put 5 rolls of 120 FP4 though and when cutting the strips and looking on my light box. I noticed one roll had three images with what looked like tiny bubbles on the top of them. I thought it was a film problem but using a loupe I see that there is some image behind the line of the bubbles.
It took me two days to discover what I think is the problem. I developed four films two days before and I did not wash the tank or reels after the final soap wash. I think that when I started the development, even though I rapped the tank, some of the cleaning solution had bubbled up again and sat on the film for the first couple of minutes.
Just thought I would pass this on. anyone else out there had this happen.
Happy thanksgiving and gobble gobble.
It took me two days to discover what I think is the problem. I developed four films two days before and I did not wash the tank or reels after the final soap wash. I think that when I started the development, even though I rapped the tank, some of the cleaning solution had bubbled up again and sat on the film for the first couple of minutes.
Just thought I would pass this on. anyone else out there had this happen.
Happy thanksgiving and gobble gobble.
