Firmware updates

[macjim]

'X-Pro1 Firmware Update Ver.3.30 Please read this update after refreshing this page. * In case of Internet Explorer and Google Chrome, hold down the control key and press the F5 key. * In case of Safari, hold down the control key and press "R" key. Detail of the update The firmware update Ver. 3.30 from Ver. 3.20 incorporates the following issues: 1. Addition of compatibility with "XF18-135mmF3.5-5.6 R LM OIS WR" To ensure that autofocus performs as expected, upgrade the firmware for the camera. 2. Change of aperture display for zoom lenses Display of aperture value when zooming with the shutter button pressed halfway will become same as the display when zooming without the shutter button pressed.'
Also, updates for all X-Series cameras with the exception of the X100/100s are available too.

 

[markrich]

Nice. Just updated my body even though the change list doesn't affect me. 🙂

 

[JohnL]

I presume it is still OK to do this update without all the previous ones - in my case I am up to 3.1 but did not do 3.2. Can anyone confirm this? TIA

 

[KCG]

I am sure that I saw on the Fuji web site that if you are upgrading from
3.1, you must first update to 3.2 then 3.3. Do not upgrade from 3.1 to 3.3.
You can call Fuji Service to verify.

 

[JohnL]

I am sure that I saw on the Fuji web site that if you are upgrading from
3.1, you must first update to 3.2 then 3.3. Do not upgrade from 3.1 to 3.3.
You can call Fuji Service to verify.

I emailed FUJI and just got their reply. They say "The current firmware 3.3 contains all previous firmware versions." which I suppose means we can go straight to 3.3 from 3.1.