wnewall
Newbie
I recently obtained a Rollei 35S where moving the shutterspeed dial did not move the red pointer in the meter window (shown in purple on the photo).
The problem was that one of the levers was out of place. The red circles show the lever before and after fix. It was easy to temporarily gently bend the lever so it could slip over into the correct position.
I also fixed the slow the shutterspeeds which were acting as B, by cleaning the small gears shown in green (following advice on this forum).
The problem was that one of the levers was out of place. The red circles show the lever before and after fix. It was easy to temporarily gently bend the lever so it could slip over into the correct position.
I also fixed the slow the shutterspeeds which were acting as B, by cleaning the small gears shown in green (following advice on this forum).