02Pilot
Malcontent
I recently purchased a Canon P body. My intent is to use my Jupiter-12 and Jupiter-8 on it. While checking and adjusting the RF calibration I found that it is not possible to have both close (1m) and infinity settings on the RF correct; with close focus set properly, the RF image goes beyond the VF image at infinity. The variation is similar with both lenses, so this appears a function of either FSU/Leica incompatibility or the RF cam follower eccentric requiring adjustment. I do not have a Leica-standard lens with which to check at the moment, so I do not know which of these possibilities it is.
My thinking is that if the problem does come down to FSU/Leica compatibility (as I suspect it might), I should keep the RF adjusted for close focus, accepting the fact that while the RF may be slightly off at longer distances, this is unlikely to have a practical effect on image focus except possibly on the Jupiter-8 when shooting wide open at distant subjects. It seems to me that DOF should take care of the RF/lens inconsistency in most cases, while I should be able to accurately focus on close subjects.
Just looking for a check here to determine the validity of my process. Thanks.
My thinking is that if the problem does come down to FSU/Leica compatibility (as I suspect it might), I should keep the RF adjusted for close focus, accepting the fact that while the RF may be slightly off at longer distances, this is unlikely to have a practical effect on image focus except possibly on the Jupiter-8 when shooting wide open at distant subjects. It seems to me that DOF should take care of the RF/lens inconsistency in most cases, while I should be able to accurately focus on close subjects.
Just looking for a check here to determine the validity of my process. Thanks.