Krasbie
Newbie
My Fujica GEr is having some problems with the shutter-aperture after i slightly stripped the lens out for some greasing. I accidentally got some grease and wd40 on the blade but it mostly evaporated 😅.But after reassembling the shutter-aperture can't close down to anywhere smaller than about f5.6 in auto mode. It can close fully in the flash guide number mode though🤨. I even bridged the ldr sensor's contacts with my screwdriver (supposedly emulating the brightest light)and it wouldn't close either. Can I fix this with some lighter fluid or acetone or is the sensor f*cked? (the wire did get snap off at some time so I did solder in a similar wire but I think it doesn't matter, slow metering is still quite accurate.) I did put in 2 lr44s in the correct position. It would be the best of my pleasure to have some diagrams or a service manual 🥰. Thanks all
