BrianPhotog
Well-known
Well, not really "fix" but tighten. Screws loosening seem to be an issue with some CV kit (like the 35 ultron, 50 nokton, etc...) and was in issue with one of my two trigger winders.
So when the trigger loosened to the point where it was no longer useable I opened it up and gave it a good tightening.
I documented how I did it on my website:
http://www.cosina-voigtlander.com/index.php?option=com_content&task=view&id=53&Itemid=1
Hope this helps!
So when the trigger loosened to the point where it was no longer useable I opened it up and gave it a good tightening.
I documented how I did it on my website:
http://www.cosina-voigtlander.com/index.php?option=com_content&task=view&id=53&Itemid=1
Hope this helps!