Roger Hicks
Veteran
Well, yes. It's a very old camera. Either get it repaired properly (if ir's a good very old camera) or admit that it was cheap to begin with; cost you almost nothng; and ain't gonna work properly again unless you pay more than it would cost to buy another one. By all means try to fix it yourself, but don't sell it to some other poor sucker wnen you fail.
Nothing made by man will last forever. Am I alone in being astonished that some people appear to expect 30+, 40+ and 50+-year-old high-end happy snap cameras (pre-1980. pre-1970 and pre-1960) to work for the rest of time? If they work (and astonishingly many do), well, great. If not, well, what would a rational person expect? How many of you are driving 50-year-old mid-range cars that have never been serviced? Or even 1950s Rolls Royces that have never been serviced?
Cheers,
R.
Nothing made by man will last forever. Am I alone in being astonished that some people appear to expect 30+, 40+ and 50+-year-old high-end happy snap cameras (pre-1980. pre-1970 and pre-1960) to work for the rest of time? If they work (and astonishingly many do), well, great. If not, well, what would a rational person expect? How many of you are driving 50-year-old mid-range cars that have never been serviced? Or even 1950s Rolls Royces that have never been serviced?
Cheers,
R.
Last edited:
newspaperguy
Well-known
Roger, despite not being a carpenter,
you do hit the nail right on the head.
Well said, Sir.
you do hit the nail right on the head.
Well said, Sir.
My 1968 Wang 360K Calculator has a stuck bit in the ALU and one of the Nixie tubes is out.
But my 50+ year old cameras are going strong. Much easier to work on. Although I hear Nixie tubes are available on Ebay.
But my 50+ year old cameras are going strong. Much easier to work on. Although I hear Nixie tubes are available on Ebay.
Phantomas
Well-known
I'd like to fix my old Kiev 4, shutter's broke. It's too pretty to be scraped. Repair will cost 6x its original price.
Help?....
Help?....
DNG
Film Friendly
Or put up on a display self of past, but great user cameras. And, when people ask about it... tell them a great story of great photographs this baby delivered in it's day.
feenej
Well-known
I spent more than 10 times the worth of a camera to get it fixed 'cause it was a gift from a friend. That, plus it only cost $50 plus shipping to have repaired HAAHa. An old-model Minolta XG-1. And I love to use it. And it was Bruce Jenner's (model) camera. Worth every penny.
Roger Hicks
Veteran
@ DNG and Feenej particularly: YES!
Others: yes too!
Cheers,
R.
Others: yes too!
Cheers,
R.
chris00nj
Young Luddite
What about:
For sale: Camera. Not sure if it is working. AS-IS.
For sale: Camera. Not sure if it is working. AS-IS.
Dave Wilkinson
Veteran
really love your replies.....always full of 'aired knowledge' !My 1968 Wang 360K Calculator has a stuck bit in the ALU and one of the Nixie tubes is out.
But my 50+ year old cameras are going strong. Much easier to work on. Although I hear Nixie tubes are available on Ebay.
aad
Not so new now.
Braun makes parts. Lots of service depots, too, even for dead NiCad units.
Very true indeed... Now granted, a "camera for life" is the hallmark of the Leica brand. But it's such a rare thing indeed in this day and age (and several before even). Leica (and independent repair folks) are in a rare position to be able to still service these bodies.
Most commercial items have a pre-determined, finite lifespan - if not a limit on parts availability after EOL (End-Of-Life). In the USA, depending on the product (or not?) I believe it's five years. At least for things like cars. Not sure how wide-ranging this is.
It's a different era now though. Everything is plastic. Everything is disposable. Not much exists today that I would expect to last 10, let alone 20 or more years. Not cars. Not TVs. Certainly nothing digital.
Case in point. I got a great electric razor about four years ago. Never a lick of trouble except replacing the foil/blade assembly yearly. Finally using Li-ion batteries, the old "death of the NiCd" was now no longer a reason to have to replace a razor. So what does Braun do? STOP MAKING REPLACEMENT PARTS! B@stards. I had had enough of them and their nickel-and-diming on the parts and cleaning fluid at this point anyway... So I promptly went out and picked up a new Philips/Norelco. It washes out in the sink! Of course, I'll probably still get screwed on the replacement heads... *sigh*
Benjamin Marks
Veteran
Hmmm. I don't know if you are alone in your astonished state, but I have plenty of cameras older than I am that are humming right along. The Rolleis, the Leicas, the Nikon Fs and Nikkormats, my Hassie 500C, and several nice LF lenses. . . all were made to be serviced. I expect them to outlast me too, given that in my wildly irresponsible acquisition of cameras the cumulative MTBF of the shutters is, in the aggregate and given my usage, longer than the number of years that I will live.
Leigh Youdale
Well-known
Amen to the razor issue. I've gone back to Gillette and foam and brush. Lightweight, compact, works anywhere in the world, parts readily available in any marketplace. Plus I get a better shave anyway!
Cameras? Well, the Nikkormat is now approximately 45 years old. Had to replace the felt seals once and yesterday I noticed that the strip that cushions the mirror when it flips up has gone a bit soft. (So have my bits that flip up).
The Rolleiflex, on the other hand, was designed not to need felt strips to seal against light leaks, so no problem there. It is just over 50 years old.
I did have a couple of Leica IIIf's which were about the same vintage but they were a bit of a pain to use compared to modern RF's so I sold them and got a couple of Bessa's. Just last week I succumbed to the Leica siren song again and bought an M6 from the 'bay. 15 years old. Described as 'minty' it is indeed so, and a beautiful piece of work. I'm going to enjoy playing with it. But you know what? Lovely as it is, and as indestructible as it feels, the M6 has only emphasised what a wonderful job CV have made with the Bessa as far as user functionality goes. There is nothing the Leica does that the Bessa does not do as well or even better in some instances. Except maybe last forever!
Cameras? Well, the Nikkormat is now approximately 45 years old. Had to replace the felt seals once and yesterday I noticed that the strip that cushions the mirror when it flips up has gone a bit soft. (So have my bits that flip up).
The Rolleiflex, on the other hand, was designed not to need felt strips to seal against light leaks, so no problem there. It is just over 50 years old.
I did have a couple of Leica IIIf's which were about the same vintage but they were a bit of a pain to use compared to modern RF's so I sold them and got a couple of Bessa's. Just last week I succumbed to the Leica siren song again and bought an M6 from the 'bay. 15 years old. Described as 'minty' it is indeed so, and a beautiful piece of work. I'm going to enjoy playing with it. But you know what? Lovely as it is, and as indestructible as it feels, the M6 has only emphasised what a wonderful job CV have made with the Bessa as far as user functionality goes. There is nothing the Leica does that the Bessa does not do as well or even better in some instances. Except maybe last forever!
KenD
Film Shooter
After a month's wait a battery for my 1977 2 stroke production racer street registered bike arrived today... same idea I guess.
tbm
Established
In 1965, when I was 12 years old, my father gave me a new Baby Rolleiflex camera. Fast forward to a few months ago when I pulled it out of a drawer in my rolltop desk. I pressed the shutter release button and it didn't work. I then remembered that is why it had sat unused in the desk's drawer for decades. I called a Rolleiflex repair guy about it and he told me to put it in the trash because the cost to repair it would exceed the camera's value, and he opined that that camera was not a very good image maker. I accepted his advice and trashed it with no regrets.
Brian Legge
Veteran
Some of us are learning to repair cameras like that Rollei. I've been buying old broken cameras and working on them for the experience. I resurrected a Rolleiflex Old Standard a few months ago... but still need more Rollei shutter experience.
The problem is, even beat up cameras like that are expensive. Hearing about people trashing them saddens me.
robklurfield
eclipse
50 years old? I'm fifty. Am I due for service?
maddoc
... likes film again.
Am I alone in being astonished that some people appear to expect 30+, 40+ and 50+-year-old high-end happy snap cameras (pre-1980. pre-1970 and pre-1960) to work for the rest of time? If they work (and astonishingly many do), well, great. If not, well, what would a rational person expect?
Pretty similar to my thoughts about people writing that they buy the actual Leica MP as a "lifetime" investment that will serve them for... well for a long long time ... I think "rational" and "camera hobby" (to use the Japanese term for it) don' go well together...
Ronald_H
Don't call me Ron
When you know a good repair guy, you only have to swallow that the repair cost is often higher than what you paid for the camera. I gladly do. Indeed, if it is a good camera.
Worst offender was my Canonet GIII QL17. Bought it for 20, had it serviced for 160. It's 25 years old. If it lasts another 25, I think it was money well spent. No, that's not true. I shot with it today and I think it was money well spent today!
Besides that, I fully expect my Leica M2, Hassy 500 C/M and Nikon FM to last me a lifetime. I'm 39 and in good health. We'll see...
Worst offender was my Canonet GIII QL17. Bought it for 20, had it serviced for 160. It's 25 years old. If it lasts another 25, I think it was money well spent. No, that's not true. I shot with it today and I think it was money well spent today!
Besides that, I fully expect my Leica M2, Hassy 500 C/M and Nikon FM to last me a lifetime. I'm 39 and in good health. We'll see...
Andy Kibber
Well-known
Things wear out and break. A true and blindingly obvious statement. Carry on, chaps! 
oftheherd
Veteran
What about:
For sale: Camera. Not sure if it is working. AS-IS.
That sounds familiar, was that you offering that?
![]()
Some of us are learning to repair cameras like that Rollei. I've been buying old broken cameras and working on them for the experience. I resurrected a Rolleiflex Old Standard a few months ago... but still need more Rollei shutter experience.
The problem is, even beat up cameras like that are expensive. Hearing about people trashing them saddens me.
Indeed! I have been getting brave of late. I got an Ibsor shutter to work properly only to have the shutter lever return spring break. Everything works except that one must return the shutter lever manually. Besides that, I have found a company that will make another identical spring for me as long as I send them another (or even attempt it if I don't). I just happen to have a second Ibsor I got back in working order. I don't really want to take it apart again, but feel I must.
Not to hijack Mr. Hicks' thread, but I suggest you offer such cameras here or even on ebay. Some people just like to tinker and even non-repairable cameras can supply parts.
Share:
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.