alex7075
Newbie
Hi everyone,
I’m in the process of reassembling the top cover of my Leitz Visoflex III, and I need help with a few mechanical details:
1. The two small springs and ball bearings:
– Where and how exactly should they be placed?
2. One of the four screws is shorter than the others. I’ve read that it must go in a specific position to avoid interfering with the internal mechanism.
– Which hole does it go into? (front left, front right, rear left, rear right — assuming front = lens side)
3. Shims:
– Where do they go exactly? Between the focusing screen and the top frame?
Any technical drawings, assembly tips, or insights from those who have opened a Visoflex III would be hugely appreciated.
Thanks in advance!
I’m in the process of reassembling the top cover of my Leitz Visoflex III, and I need help with a few mechanical details:
1. The two small springs and ball bearings:
– Where and how exactly should they be placed?
2. One of the four screws is shorter than the others. I’ve read that it must go in a specific position to avoid interfering with the internal mechanism.
– Which hole does it go into? (front left, front right, rear left, rear right — assuming front = lens side)
3. Shims:
– Where do they go exactly? Between the focusing screen and the top frame?
Any technical drawings, assembly tips, or insights from those who have opened a Visoflex III would be hugely appreciated.
Thanks in advance!