aizan
Veteran
as there have been some tweaks to the hexar rf's design, let's figure out some cutoff numbers to best ensure a good body.
mine is #1443xxx. it's in the shop for "leaky" framelines.
mine is #1443xxx. it's in the shop for "leaky" framelines.
aizan
Veteran
both of dante's were fine: 14462xx and 14506xx.
KoNickon
Nick Merritt
Not sure what is meant by "leaky" framelines. I do know that if I have an M adaptor mounted on the camera, toggling between framelines sometimes causes the framelines to hang up slightly, so that I can see two different sets of framelines at once. A slight nudge to the preview lever is all that's required. But anyway, mine is #14444xx.
aizan
Veteran
is your adaptor for 50mm? mine also hung up with the 50/2 m-hexanon mounted, so maybe it isn't an adapter issue.
as for leaky framelines, it happened in diffuse lighting or when a light source was just out of view. it just didn't mask the framelines completely, regardless of the lens mounted.
as for leaky framelines, it happened in diffuse lighting or when a light source was just out of view. it just didn't mask the framelines completely, regardless of the lens mounted.
Last edited:
aizan
Veteran
davidde stella just posted his hexar's serial# on egroups...because it was stolen! if you ever come across it, let him know.
#1448241
http://groups.yahoo.com/group/hexarRF/message/4910
just an update
sockeyed: #1440416
rangefinder problems
#1448241
http://groups.yahoo.com/group/hexarRF/message/4910
just an update
sockeyed: #1440416
rangefinder problems
Last edited: