1750Shooter
Established
Does anyone have any experience stand devoping HP5+? i've done it with Tri-X, but not HP5+ & want to try. Thanks for any input.
HP5+ Stand Development
- Thread starter 1750Shooter
- Start date
- Latest activity Latest activity:
- Replies 5
- Views 2K
DominikDUK
Well-known
HP5+ Stand is no different than Tri-X Stand 60mins 1:100 Rodinal 20°C.
I regularly develop HP5 this was. Invert during the first minute and let it stand for the remaining time.
Good luck
Dominik
I regularly develop HP5 this was. Invert during the first minute and let it stand for the remaining time.
Good luck
Dominik
Colin Corneau
Colin Corneau
Shouldn't be any different.
FWIW, I used FP4+ with Rodinal 1:100 for 2 hours -- agitate once at the start, once at midway and then on to stop & fix.
Best of luck
FWIW, I used FP4+ with Rodinal 1:100 for 2 hours -- agitate once at the start, once at midway and then on to stop & fix.
Best of luck
1750Shooter
Established
Thanks. Now, I'll ask - has anyone used HC110 w/HP5+ in stand developing. I only have HC110 & D76. Thanks.
Faintandfuzzy
Well-known
I've never tried HP5 in Rodinol....I've always heard the results were not as good as Tri-x. I'll have to give it a try.
k__43
Registered Film User
I drowned it in Rodinal 1+100 for two hours and exposed the film at 1600 once .. worked ok
I also made a test from 200 to 1600 ISO on that strip suggesting that all those speeds would be okish with that recipe (1600 being the thinnest neg, so maybe harder to print and 200 being quite thick .. I only scanned them so ..)
I also made a test from 200 to 1600 ISO on that strip suggesting that all those speeds would be okish with that recipe (1600 being the thinnest neg, so maybe harder to print and 200 being quite thick .. I only scanned them so ..)
