Industar 61 l/z Aperture blade assembly

[Moto-Uno]

I'm in need of some help , I'd stripped this lens to remove and clean the shutter blades AND , before I could get a picture of their assembly they were all over my work desk . I've spent numerous hours searching for the proper ( with pictures ) reassembly of this lens and have found no happiness . Would anyone here possibly have knowledge of this lens or a link I can follow ?
I kinda like this lens on my Chinon . Thanks,Peter

 

[Moto-Uno]

Sorry for bumping this thread , BUT , I sure could use some help here ! Thanks, Peter

 

[Moto-Uno]

So , this was the cause of my earlier post and I'll follow with a few more . Peter

 

[Moto-Uno]

After what was more than a few frustrating hours ( there's an understatement ) I got lucky !

 

[Moto-Uno]

From this point on it was trying to remember the where the lens assembly etc. went . To add to this challenge I finally got the aperture ring snugged up , not as intuitive as I'd hoped . Peter

 

[Moto-Uno]

Finally , this lens group assembly was installed into the focusing barrel and it was a hallelujah moment , smooth focusing and aperture changing and clean glass . Now I really like this lens on my Chinon CM-3 . Peter