raid
Dad Photographer
My Koni-Omega Rapid M is a rangefinder with interchangeable backs and lenses.
Greg Weber is the man for repairs on these. However if you feel like doing a little work yourself, see the following page....
http://www.mflenses.com/koni-omega-back-repair.html
I would recommend that you print it out and save it for when you need it. They all seem to overlap at times....
wbill
I also got a Rapid Omega 100 recently. The viewfinder was really murky and the parallax correction wasn't working, so I popped off the cover (three screws) and carefully cleaned all the surfaces and fixed the parallax issue. I highly recommend cleaning the viewfinder/rangefinder surfaces--it makes a huge difference. My viewfinder is crisp and clear now with a sharp RF spot.
If there is one, then I don't know it.
Out of the 3 backs that I had, one came with a plastic cover.
I suppose you can take the magazine out, walk into a dark room, remove the slide, put the plastic cover and type the edges (with black electrical tape).
But that's not a trick, it's... inconvenience...
anyone knows the filter size of the 90mm?
It takes a Series VI filter ring and filters.
It takes a Series VI filter ring and filters.
or just 49mm if you unscrew the ring
or just 49mm if you unscrew the ring
Did you try with a rubber pad (to get more grip/friction)?