mugs250
Newbie
Hi all,
Recently got a Leica 3F (black dial) and was pretty disappointed to find out the ranger finder isn’t working, whenever I try to focus with my lens the patch doesn’t move at all when I look through the ranger finder window.
Does anyone have an idea what’s going on?
Thanks!
Recently got a Leica 3F (black dial) and was pretty disappointed to find out the ranger finder isn’t working, whenever I try to focus with my lens the patch doesn’t move at all when I look through the ranger finder window.
Does anyone have an idea what’s going on?
Thanks!
Gregm61
Well-known
The lens cam in the back near the mount, mates with the RF cam/device inside the body mount and in front of the shutter curtains at the top. Those two moving together are what drives the rangefinder.
What lens are you using? Assuming those two "link up" the system should work. Otherwise, there may be something internal that needs servicing and there are people who work on those bodies, such as...
http://www.yyecamera.com/price_list.html#
What lens are you using? Assuming those two "link up" the system should work. Otherwise, there may be something internal that needs servicing and there are people who work on those bodies, such as...
http://www.yyecamera.com/price_list.html#
Timmyjoe
Veteran
Can you see the patch clearly? I had a iiif once that the patch was so faint you couldn't see it move until I put an orange gel over the rangefinder window.
Best,
-Tim
Best,
-Tim
mugs250
Newbie
I’m using the Elmar 50mm f3.5 the weird thing is the little RF device in the camera is loose and moves back and fourth. Is that suppose to be the case?
I know on my Zorki 4K the RF device is firmly in place but I don’t know if the device in the Leica is supposed to be loose or not!
Also, I can see the patch but it is a little faint! What kind of gel did you use Tim?
I know on my Zorki 4K the RF device is firmly in place but I don’t know if the device in the Leica is supposed to be loose or not!
Also, I can see the patch but it is a little faint! What kind of gel did you use Tim?
Roger Hicks
Veteran
What exactly to you mean by "loose"? Obviously it has to move back and forth against the spring but is it flopping up and down or is there no spring loading?
Cheers,
R.
mugs250
Newbie
It's like a little arm that the little circular thing is attached to. It's definitely flopping around. If there's supposed to be any kind of tension there's none.
hwsthl
Newbie
There certainly should be spring tension there, it should spring outwards if you press it in. My guess would be a loose connection between that arm and the square shaft it connects to, possibly caused by a loose screw. It could also be a weak leaf spring but that seems less likely.
A photo or video of how it's behaving would help diagnose the issue if that's possible.
A photo or video of how it's behaving would help diagnose the issue if that's possible.
hwsthl
Newbie
My guess would be something in this area is loose/broken.
rfaspen
[insert pithy phrase here]
I hate to say it, but it sounds like the camera will need to visit the camera doctor. The RF arm should not flop around loosely. It should only move when you press on it.
If the RF mechanism has become undone, I wonder if anything else in the camera has worked loose. I also wonder just what happened to this camera to cause the problem in the first place. Sometimes we don't know much, if anything, about the history of our cameras. This poor guy could have been dropped or slammed against a hard object. Or it could have been strapped tightly to the back of a motorcycle and taken on a cross-country trip (certain death for a camera).
What I'm getting at: it might be more efficient and wise to send the camera to a competent technician for a good checkup -- the ubiquitous "CLA" -- to address the RF issue and whatever else might be lurking inside.
If the RF mechanism has become undone, I wonder if anything else in the camera has worked loose. I also wonder just what happened to this camera to cause the problem in the first place. Sometimes we don't know much, if anything, about the history of our cameras. This poor guy could have been dropped or slammed against a hard object. Or it could have been strapped tightly to the back of a motorcycle and taken on a cross-country trip (certain death for a camera).
What I'm getting at: it might be more efficient and wise to send the camera to a competent technician for a good checkup -- the ubiquitous "CLA" -- to address the RF issue and whatever else might be lurking inside.
mugs250
Newbie
I’ll take some photos and videos as soon as I get the chance!
mugs250
Newbie
It’s a hard thing to think about for sure! The seller told me it was in good condition before he sent it to me and he was located in the states and I’m in Canada so I’m guessing (if the seller is honest) it happened during shipping? I have been having some issues with the slower shutter speeds as well.. the 1/60th shutter speed gets jammed frequently.. I’ll take some videos and post them just to show you all.
I’m going to a camera repair shop tomorrow to get an estimate and hopefully get it fixed within the week.. I’m absolutely dying to shoot this beautiful camera but patience comes first I guess lol.
Do you have any recommendations of a good technician around? I’ll see how much it will cost me locally but if I can save a few bucks a I’ll go with that route.
mugs250
Newbie
Thanks for the photo! I’ll show it to the repair guy tomorrow!
rfaspen
[insert pithy phrase here]
Well, sometimes sellers are honest and simply don't know what "good condition" is. Sometimes sellers are not so honest. I have seen plenty of both situations.
Its clear that the camera needs to be serviced to be brought back to good condition. The good news is if you can send it to a competent technician, it will become a fantastic little camera that should be robust and reliable for decades to come (30-50 years). The LTM Leicas are truly built to such standards -- a concept long abandoned.
There are good repair technicians in Canada. I just can't remember any right now. I personally try to send most of my Leica (and related) to Don Goldberg (aka DAG Camera Repair) in Wisconsin, USA. In my opinion he is the best there is, but not cheap. In the US, you will hear about Youxin Ye in Massachusetts (I believe). He does good work on "simple" repairs, such as a standard CLA, and he is not very expensive. I don't know if the fact he's in the US, and you're in Canada, has much impact. Regardless, I recommend looking at Youxin's website and checking out the prices for his standard services. That will give you an idea of lower end of costs.
Its clear that the camera needs to be serviced to be brought back to good condition. The good news is if you can send it to a competent technician, it will become a fantastic little camera that should be robust and reliable for decades to come (30-50 years). The LTM Leicas are truly built to such standards -- a concept long abandoned.
There are good repair technicians in Canada. I just can't remember any right now. I personally try to send most of my Leica (and related) to Don Goldberg (aka DAG Camera Repair) in Wisconsin, USA. In my opinion he is the best there is, but not cheap. In the US, you will hear about Youxin Ye in Massachusetts (I believe). He does good work on "simple" repairs, such as a standard CLA, and he is not very expensive. I don't know if the fact he's in the US, and you're in Canada, has much impact. Regardless, I recommend looking at Youxin's website and checking out the prices for his standard services. That will give you an idea of lower end of costs.
mugs250
Newbie
Thank you so much, I’ll check them both out.
I’m really new to the whole LTM world of cameras and I’m glad that there’s a place that I can get all my questions answers by people who know much more than I do. I’m very excited to get the 3F up and running!
Cheers,
-Mugs
Dan Daniel
Well-known
Oh, if you do send the camera to the US, look into proper customs declarations to indicate that it is a service repair, not a new (to you) purchase. USPS is best for shipping back to Canada, not UPS or Fed Ex.
The 3f is a very well-known camera by most older repairmen. I know people who were trained specifically on that camera for large chunks of their training. So very likely any competent repairman comfortable with mechanical cameras can help you. I know this goes against the general wisdom here that there are only one or two people in the world who can do the work, but 20-30 years ago most any repairman could do basic work on a 3f.
The 3f is a very well-known camera by most older repairmen. I know people who were trained specifically on that camera for large chunks of their training. So very likely any competent repairman comfortable with mechanical cameras can help you. I know this goes against the general wisdom here that there are only one or two people in the world who can do the work, but 20-30 years ago most any repairman could do basic work on a 3f.