Godfrey
somewhat colored
Cal asked what my SL button customizations were as he hasn't done much in that direction yet. The following is copied from my notes on other forums.
---
I had my SL setup pretty well configured by December 2015 and that continues to work well for me. One change from that configuration is that with firmware 2.0 released, I've enabled direct Exposure Compensation.
What follows are my basic settings. They differ just a little in the different user configs:
I have these settings encapsulated into a User Profile named "RLens", with DNG only at the full frame format and default R lens set to Summilux-R 50mm.*
The same settings swapped over to 1:1 format, DNG+JPEG, B&W rendering with +1 contrast for JPEGs, and default lens profile set to Super-Elmar-R 15mm. This is stored in a user profile named "SWC".
The same basic settings in RLens are also used in two additional user profiles for the native mount Vario-Elmarit-SL 24-90mm lens. One of them has the toggle button set to do AF and the focus mode set to MF ("SLensM"). The other has the focus mode set to AF and the toggle button set to AE-Lock ("SLensA").
enjoy,
G
---
I had my SL setup pretty well configured by December 2015 and that continues to work well for me. One change from that configuration is that with firmware 2.0 released, I've enabled direct Exposure Compensation.
What follows are my basic settings. They differ just a little in the different user configs:
Button (short press, not editable) :: Long press (editable)
----------------------------------
TL (menu) :: Drive mode
BL (magnification) :: Exposure pattern
TR (review) :: Exposure Compensation
BR (view overlay) :: ISO
-
LV (still/video mode switch) :: Exposure bracketing
FN (normal/aperture/exposure simulation) :: Lens Profiles
video (disabled) :: User Profiles
----------------------------------
TL (menu) :: Drive mode
BL (magnification) :: Exposure pattern
TR (review) :: Exposure Compensation
BR (view overlay) :: ISO
-
LV (still/video mode switch) :: Exposure bracketing
FN (normal/aperture/exposure simulation) :: Lens Profiles
video (disabled) :: User Profiles
I have these settings encapsulated into a User Profile named "RLens", with DNG only at the full frame format and default R lens set to Summilux-R 50mm.*
The same settings swapped over to 1:1 format, DNG+JPEG, B&W rendering with +1 contrast for JPEGs, and default lens profile set to Super-Elmar-R 15mm. This is stored in a user profile named "SWC".
The same basic settings in RLens are also used in two additional user profiles for the native mount Vario-Elmarit-SL 24-90mm lens. One of them has the toggle button set to do AF and the focus mode set to MF ("SLensM"). The other has the focus mode set to AF and the toggle button set to AE-Lock ("SLensA").
enjoy,
G