Lens Detectin ON + UV/IR ?

U

usccharles

Well-known
Local time
6:07 AM
Joined
Nov 6, 2005
Messages
331
When you are using a Non-6bit coded lens With an IR filter on, which option do you use in the Menu?

On + UV/IR

or

OFF

?

thanks :)
 
Last edited:
Off. The coding tells the M8 what lens corrections to make with or without the IR filter. Since there isn't a Off/On choice then you can't tell the camera what lens you have on. (Leica, please let us manually add the focal length! please!)
Try it both ways and see what happens. only will make a difference with wide lenses <35 mm.
Steve
 
I have mine set to ON+UV/IR Filter. Seems to work just fine, and not coded lens for at least 20 miles. For all i know, i'm the only m8 owner in Iowa. ;-)

Gene
 
usccharles said:
When you are using a Non-6bit coded lens With an IR filter on, which option do you use in the Menu?

On + UV/IR

or

OFF

?

thanks :)
Click to expand...
OFF.
The coding is used in the "paint-by-numbers" pre-processing of both JPEG and DNG file writing. The IR/UV filter is just that, for IR/UV, and unless the firmware /knows/ the lens(coding), you will get kruft in your images with lenses "unknown".

I use it for only coded lenses(CV 15,25 & 35), thus an event-driven tweak.

Is your Nocti coded? Just curious... oh, and you've the 75 'lux too(no?)

rgds,
Dave

PS-I use ZM 25 and 28 uncoded, w/filters "reasonably" without the "cyan corners"
 
DaveSee said:
OFF.
The coding is used in the "paint-by-numbers" pre-processing of both JPEG and DNG file writing. The IR/UV filter is just that, for IR/UV, and unless the firmware /knows/ the lens(coding), you will get kruft in your images with lenses "unknown".

I use it for only coded lenses(CV 15,25 & 35), thus an event-driven tweak.

Is your Nocti coded? Just curious... oh, and you've the 75 'lux too(no?)

rgds,
Dave

PS-I use ZM 25 and 28 uncoded, w/filters "reasonably" without the "cyan corners"
Click to expand...

hi dave see,

my nocti and the 75 lux are both uncoded. this is all very confusing for me. i've just been going 'off' for uncoded lenses and 'on+IR' for my coded lenses and it seems to be okay so i'll just stick with that.

i wish they also had an option for just 'IR/UV' to indicate a lens with no coding but with a IR filter. I'm guessing thats what 'OFF' means but 'OFF' can also go for non-coded, non-IR filtered lenses too...

:bang:
:bang:
 
If the lens is uncoded, it does not matter. When the lens is not recognized by the camera, the corrections are not applied, thus the setting is irrelevant.
 
You must log in or register to reply here.
Back
Top Bottom