LTM on M6 or M?

M

matu

Guest
Recently I bought an M6, and since I have some LTM (an 35mm /F3.5Elmar and a 90mm/F4, pre war no coating) lenses I was consdidering using them to see how much TTL improves their performance.
If you put a LTM with the adaptor, are the frame lines combination actually automatically going to change?
Can the frames selector operate manually? I know I can preview other combinations.
Indulge me if this has been asked before.

Pablo
 
Pablo, there are three different adaptors. The only difference among them is which framelines they bring up. So, for convenience only, you'll want to buy an adaptor that brings up the frameline for the lens you'll use with it.
 
Pablo,

The adapters are available in the following types from Voigtlander:
Screw to M Bayonet Adaptor 28/90mm, 35/135mm, 50/75mm

They bring up the pairs of framelines just the same as if you used the preview lever.

Hope this helps.
 
Here is the pre-war 9cm F4 Elmar on my Canon 7 with its Selenium Meter. Looked pretty good to me, even without TTL!
 
Well, should buy the 3 sometime.
Brian your picture motivates me to try mine in colour, I never had use it on colour film (you have a nice daughter).
The TTL intrigues me on how much I was loosing exposing the film, I guess I should compensate for more light because de 9cm requires more light.
Thanks a lot.

Pablo
 
You must log in or register to reply here.
Back
Top Bottom