Lynx 14E square hood/shade

[#FT2_8*fffg.]

One is coming in the mail for me. I plan on sending it to a local person for a CLA. My understanding is this camera needs a hood, to prevent flare.

The one that interests me is this square hard plastic one, 58mm theread.. I think one edge could be cut out for better viewing:

http://cgi.ebay.com/Medium-Format-L...0QQihZ012QQcategoryZ78999QQrdZ1QQcmdZViewItem

Has anyone tried this type on the Lynx?

 

[Abbazz]

Never tried the plastic square hood you mention, but I have the Kalt metal hood (link). It works well with no vignetting and without obscuring the rangefinder window. And it's cheaper too

Cheers,

Abbazz

 

[#FT2_8*fffg.]

There's a probable chance I'll take your advice and go with the Kalt. Is it originally meant for a standard lens (45mm)? It seems a bit shorter than the rubber ones, but it may need to be since 45mm is a bit wider than 50mm.

Thanks.

 

[Abbazz]

I don't know which focal length it has been designed for, but it performs adequately on my Lynx 14E. I also use the metal model in 49mm on my Olympus 35SP, which has a 42mm lens. I have tried the Kalt rubber hood on the Lynx, it does indeed block the rangefinder window, preventing it to function normally.

Cheers,

Abbazz

 

[Bill58]

I use a Hama square, plastic hood in 55mm w/ a step-down ring and no problems. BTW-- do you know if their ( Fotodiox ) step-up rings are brass or aluminum?

 

[Abbazz]

do you know if their ( Fotodiox ) step-up rings are brass or aluminum?

I have no idea, but I tend to believe these are aluminium. I think B+W and Heliopan are the only step-up rings made of brass, as you can tell from the selling price

Cheers,

Abbazz