M6 Film rewind lever

[pescod]

I have a little doubt regarding the M6 rewind lever, after that I rewind a film I have to put in original position manually the R lever and extract the film cartridge? :bang: It doesn't come back alone, is it true?

 

[kbg32]

After your last exposure on the roll, move the lever to "R", rewind the film, take off the base plate, extract the film cartridge, load another roll, put base plate back on. The rewind lever will pop back in place when the film is advanced.

 

[pescod]

After your last exposure on the roll, move the lever to "R", rewind the film, take off the base plate, extract the film cartridge, load another roll, put base plate back on. The rewind lever will pop back in place when the film is advanced.

Thanks a lot, but if I don't load an other film can I pool back the lever?

 

[markinlondon]

Yes, but there's no need.

Mark

 

[saxshooter]

Just crank the advance and theh rewind lever will pop back.