M8 File Transfer after 2.002 Firmware Update

G

_goodtimez

Well-known
Local time
1:25 AM
Joined
Mar 25, 2007
Messages
1,063
Hi all,

Here is a problem observed with my Classic M8 after upgrading to 2.002:

I took a series of photographs with the camera in DNG and DNG + Jpeg Fine and DNG + Jpeg Basic.
When I use the Camera as the Card reader (M8 connected directly to the PC via the furnished cable), only TIFF pictures are transfered.
When I use the Card through a card reader, everything OK: I get DNG Files and Jpeg Files on the PC.

Pictures taken in single Jpeg are transfered ok with both set ups (directly read from M8 or using a separate card reader).

I use Windows XP.
I have reported the problem to my dealer today (M8 still under warranty) and I wanted to know if you had experienced the same thing.

Thanks in advance.
Joan Goodtimes:bang:
 
Hi Joan,

What software are you using? My files are downloaded as tif files and then converted to DNG using Adobe Bridge. I think that's always been the case (I only use RAW/DNG). From memory, too, the software that came with the camera (Capture 1(?)) only worked with a card reader. I don't think it's a problem with the camera or the upgrades.

Lee
 
I'd be interested in seeing a response to this too. In my pre-2.002 software I saw two TIFF files with the identical names and file extension being transferred when the camera was tethered. The second file had a (2) added to its name but both files were identical when opened in Capture One.

Thx
Prabha
 
You must log in or register to reply here.
Back
Top Bottom