jl_1303
Member
I bought this Minolta Multi Pro 2nd second hand and everything works except that the color and brightness of the scanned image appear too redish and dark compared to the slide viewed on a light box.
I do not have an IT8 target to calibrate the color/brightness but the pre-scanned image looked normal on screen (pretty correct color and brightness visual so that the possibility of the screen playing up is ruled out) whereas our after scanning, the scanned image became too redish and dark. Both Adsee and PS showed that the scanned images are too redish and dark.
Do I need a calibration or I have a weak lamp element that requires replacing.
Please share your experience/opinions. Thanks.
Jeremy
I do not have an IT8 target to calibrate the color/brightness but the pre-scanned image looked normal on screen (pretty correct color and brightness visual so that the possibility of the screen playing up is ruled out) whereas our after scanning, the scanned image became too redish and dark. Both Adsee and PS showed that the scanned images are too redish and dark.
Do I need a calibration or I have a weak lamp element that requires replacing.
Please share your experience/opinions. Thanks.
Jeremy
Borghesia
Well-known
I don't know the answer on your question but there are enough people in the Multipro Yahoo-group that could help you.
If you can find a replacement lamp, let us know.
If you can find a replacement lamp, let us know.