Need KM 5400 II Scanner repair

srtiwari

srtiwari

Daktari
Local time
4:50 AM
Joined
Oct 3, 2005
Messages
1,032
My scanner suddenly refused to turn on, after being used just a few minutes earlier. my simple attempts to readjust the power cable etc., did nothing. Opening the case shows nothing "out of place" to my untrained eye. The scanner had not been moved/jostled etc., and I was just testing it to send off to someone interested in it.

I cannot get past Sony's automated answer system to talk to anyone, but understand they no longer fix scanners.
Precision camera (despite a "quote" for repair online), tell me they no longer have parts to fix KM scanners.

Anyone have any ideas about where I could look next ? Don't know if the regular camera repair guys (DAG etc) do this work. The KM 5400 II is a lovely scanner, and I'd hate to lose using it.
 
srtiwari said:
My scanner suddenly refused to turn on, after being used just a few minutes earlier. my simple attempts to readjust the power cable etc., did nothing. Opening the case shows nothing "out of place" to my untrained eye. The scanner had not been moved/jostled etc., and I was just testing it to send off to someone interested in it.

I cannot get past Sony's automated answer system to talk to anyone, but understand they no longer fix scanners.
Precision camera (despite a "quote" for repair online), tell me they no longer have parts to fix KM scanners.

Anyone have any ideas about where I could look next ? Don't know if the regular camera repair guys (DAG etc) do this work. The KM 5400 II is a lovely scanner, and I'd hate to lose using it.
Click to expand...

That may not help you, but my Coolscan V just went dead from one day to the other. After a couple of month, I decided to check it myself and opened it. So I found they actually did not provide the proper fuse (2A required but 1A slotted in), which eventually smoked the underspecified fuse.

After replacing it, the scanner works now for more than a year with no complaints.

Good luck

Ivo
 
Photon42 said:
That may not help you, but my Coolscan V just went dead from one day to the other. After a couple of month, I decided to check it myself and opened it. So I found they actually did not provide the proper fuse (2A required but 1A slotted in), which eventually smoked the underspecified fuse.

After replacing it, the scanner works now for more than a year with no complaints.

Good luck

Ivo
Click to expand...

Thank you, Ivo , for the response. I did open it, but could not figure out if/where there was a fuse. If I knew that I could give it a shot.
Subhash
 
For some reason I cannot upload images (quote problem, but I only have 134k used and the one I want to upload has 54k ...). Here is a link to the L-Forum for the picture of the Coolscan fuse. Maybe that helps.
 
I would ask the folks at KEH.com where they would suggest to send it for repairs. I don't have any experience with asking that question but I'd think if anyone knew where to send a scanner it would be them.
 
You must log in or register to reply here.
Back
Top Bottom