T
tedwhite
Guest
First, cut off your nose. If you're not so inclined, this might help. This post, of course, is only for the left-eyed. You take your new Bessa out of the box, screw in the LTM lens of your choice, bring the camera to eye-level, marvel at the stunningly bright viewfinder image, snap off a few, then - Oh No! - you've got nose oil all over the back covering.
Black duct tape. Three of them. About three and a half inches long, stretching horizontally from the little grip protrusion on the camera back's right side to about 1/2" from the film window. Slight overlap. You can shoot all day long, and at day's end simply wipe the nose oil on the duct tape off with a soft cloth. N/O can't soak into duct tape like it loves to do with the camera clading.
But! What happens if you decide to sell the camera? Remove duct tape, and take a soft cloth with a very tiny bit of Goof Off, and whatever sticky residue (surprisingly, not much) is left miraculously disappears.
A friend of mine recommends the blue masking tape which allegedly comes off with no trace.
Black duct tape. Three of them. About three and a half inches long, stretching horizontally from the little grip protrusion on the camera back's right side to about 1/2" from the film window. Slight overlap. You can shoot all day long, and at day's end simply wipe the nose oil on the duct tape off with a soft cloth. N/O can't soak into duct tape like it loves to do with the camera clading.
But! What happens if you decide to sell the camera? Remove duct tape, and take a soft cloth with a very tiny bit of Goof Off, and whatever sticky residue (surprisingly, not much) is left miraculously disappears.
A friend of mine recommends the blue masking tape which allegedly comes off with no trace.