Off shoe flash.. how?

P

PaulN

Monkey
Local time
12:05 PM
Joined
May 23, 2005
Messages
186
Location
Boston
View My Gallery
What is the easiest way to connect a flash to the r-d1 and hold it out at arms length? I was at my local calumet, and they all stared at me if I was crazy. The flash I have is a Canon 550ex. Is there some sort of hotshoe to hotshoe adapter I could cobble together?
 
The 550ex does not have a PC socket.

You are going to need something like this:

http://www.paramountcords.com/proddetail.asp?prod=PW-MHSF1&cat=85

Mhsf1l.jpg


But with a PC on the other end instead of that pocketwizard miniplug. Call paramount cords and tell them what you want, they will sell you one.

Or, buy a standard canon TTL off-camera cord. It should sync just fine in manual mode with the R-D1. Although I would test this at the store before I bought one.
 
I was just going to link that until I saw the post above. Saxshooter linked my post about the Vivitar with the remote sensor. That's the ticket, as far as I'm concerned.

Sean
 
I find that PC connectors tend to slip out of the socket now and then. You should also be able to get a non-TTL hotshoe cable that slips directly into the shoe of the RD-1 (it has a shoe, right?) and onto the shoe of the flash.

allan
 
if you try to use the Canon 550ex it will only shoot at full power, no adjustments at all.
Just get a vivtar 283 they you can use the manual and automodes just fine.
 
Isn't the r-d1 digital? If so, be CERTAIN that your flash doesn't exceed the camera's voltage rating. The early Vivitar 283's can ruin a digital camera. AFAIK, the 285 HV doesn't regardless of year/place of manufacture.

I use a Sunpak flash grip with an FLM Flash Ballhead on the grip. A hotshoe adapter on the Pentax *iDS camera and connecting cord between my 285 HV and the adapter. I use a lot of bounce flash so the ballhead allows me to turn the flash for vertical shots. It works pretty well.

Walker
 
You must log in or register to reply here.
Back
Top Bottom