wblynch
Well-known
... Any suggestions for methods, materials, etc...
My creep is truly trivial and it would be great if I could just "wipe" it up, even if not a 100% solution.
This is only my experience. Be careful.
First do a search for OM-1 prism foam removal. Sorry I don't have the link.
----
When I removed the top cover I could see the rotted foam around the eyepiece under the flash bracket. Once I unscrewed and lifted that bracket and (((carefully))) picked out the hardened foam, I saw the bubbled spots in the black paint on the top of the prism.
Personally, I would try a little Windex window and glass cleaner on a Q-tip/cotton bud. If that did not help, then a little rubbing alcohol on the Q-tip would get it.
I would NEVER use acetone or MEK for this. NEVER. Just gentle solutions. Maybe only water.
I was very careful not to let anything drip down into the viewing screen, knowing I would regret that. A little paper towel or tissue stuffed into the sides helped catch any drips.
I wiped it clean with a microfiber cloth and then put it all back together.
----
It won't make it perfect but it will improve the viewing experience a good amount.
Oh.. and don't scratch anything. 🙂
-Bill