Processing labs

[seany65]

I've just abandoned Max Spielmann as they now want to charge £21.99 for a 35mm mono film.

I did some searching and "DS Colour Labs" In Didsbury, (just South of Manchester), process and print 35mm/120 and 110/126 film in mono and colour.

They do a 36-shot 35mm mono film to 6x4 for £12, though postage is £4.99, so it makes sense to send a couple at a time.


EDIT: For some reason DS colour Labs only print 110 and 126 film to 6x4 inches! You'd think they'd do 5x4 for 110 and 4x4 or 5x5 for 126.

 

[stevierose]

I usually develop my own film, but on occasion have a lab do it. If you want to try a lab I would suggest PhotoVision lab in Oregon. They charge $14/roll to develop and scan BW film. They do very clean developing and excellent scans with some basic dust busting. They use a "dip and dunk" machine and Clayton F76+ developer. It's not a bad idea to first get the hang of film/RF photography and then start developing your own film. If you do it all at once there may be too many variables for you to figure out what's working and what isn't. http://photovisionprints.com

 

[sepiareverb]

https://www.ilfordphoto.com/beginners-guide-processing-film/

 

[g812]

Thanks for the info...
I have book marked the Ilford web page 🙂
But for time being I have found me some place local (some 2nd hand dealer), that develops and prints, at a reasonable rate 🙂
So for now (while I convince the purse, at least 😉 ), I'll get them done there 🙂
Thank you all again 🙂