dcsang
Canadian & Not A Dentist
Ok.. so I got the Hadley Pro (thanks to all the comments on a recent thread) and it was local at a very reasonable price 
I noted that it comes with two larger dividers and two smaller ones.
I honestly think I can add at least one more larger divider to split the bag up "just right" but don't know which divider I would use.
Does anyone have any suggestions?
Just to be clear, I would like three large dividers in the bag to make 4 "slots" within the main compartment.
Cheers,
Dave
I noted that it comes with two larger dividers and two smaller ones.
I honestly think I can add at least one more larger divider to split the bag up "just right" but don't know which divider I would use.
Does anyone have any suggestions?
Just to be clear, I would like three large dividers in the bag to make 4 "slots" within the main compartment.
Cheers,
Dave
back alley
IMAGES
i have a bag of extra dividers that have been collected over the years...i usually just try to find one that works...
dcsang
Canadian & Not A Dentist
i have a bag of extra dividers that have been collected over the years...i usually just try to find one that works...
I was thinking of that too Joe.. I wanted something as "tall" as the Billingham ones.. I hope I've got one laying around
Cheers,
Dave
back alley
IMAGES
does billingham sell it's own dividers?
maybe ask rob.
maybe ask rob.
dcsang
Canadian & Not A Dentist
does billingham sell it's own dividers?
maybe ask rob.
I was checking on B&H's website. I see a bunch of them but I don't know if they'll fit the Hadley Pro.
I'll keep looking.
Cheers,
Dave
dave lackey
Veteran
Suggestion , why not get an extra insert.. Use one divider from it and save the extra insert for a different gear setup that can be used as a two-compartment setup for other gear? Just take out one insert (say for m bodies) and place the other (say for SLR gear) in the bag when you have need for a different kit?
Archiver
Veteran
I've used the two large dividers to make small sections on each end of the bag, just big enough to slot in a M(whatever) with short lens. At the bottom of each, I put the small square dividers in a trapdoor arrangement, so a lens can go at the bottom, and a camera can sit on top. Then the larger middle section can be used for whatever knickknacks I want to carry.
j j
Well-known
I was checking on B&H's website. I see a bunch of them but I don't know if they'll fit the Hadley Pro.
I'll keep looking.
Cheers,
Dave
Ask the maker direct? http://www.billingham.co.uk/pages/contact.php
Sparrow
Veteran
I've used the two large dividers to make small sections on each end of the bag, just big enough to slot in a M(whatever) with short lens. At the bottom of each, I put the small square dividers in a trapdoor arrangement, so a lens can go at the bottom, and a camera can sit on top. Then the larger middle section can be used for whatever knickknacks I want to carry.
... ditto, except I have the front one full depth for all the bits ...

Share:
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.