Muggins
Junk magnet
Can anyone suggest a source of red plastic suitable for making replacement red windows from? They are more for completeness than functionality, but it would be nice to find something I could use for a couple of my junkster cameras missing theirs. Fundamentally it needs to be thin, red, hard, and easy to cut to shape.
Thanks in anticipation!
Thanks in anticipation!
Vince Lupo
Whatever
Would rubylith film work? Only thing is that it’s not ‘hard’ like a plastic.
shop.archsupplies.com
Rubylith Masking Film 15x30
Rubylith®brand masking films are "light safe" knife cut films coated onto a polyester backing sheet. These films can be cut manually or on a plotter to produce masks for film contacting and plate making and film positives for photographic stencil production. Rubylith® is a red masking film...
shop.archsupplies.com
Johngwill
Established
Have a look at lighting gel filters. Right thickness, many colors available, easy to cut. I use a hole punch of the diameter required.
raydm6
Yay! Cameras! 🙈🙉🙊┌( ಠ_ಠ)┘ [◉"]
Best answer in this thread.
www.photo.net
Red Bingo chip!!
120 Camera restoration - film view window
<p>Looking to fix up an old 120 roll camera (Ensign Autorange 220 - beautiful machine) but the red plastic window on the rear door has been split at somepoint. I know I could just tape over it, and as this camera only needs it to find frame number 1, it should all work fine, but I'd rather ...
www.photo.net
Red Bingo chip!!