Rollei 35 B Meter

naql

Established
Local time
12:18 PM
Joined
Apr 28, 2009
Messages
117
Location
Kodiak, AK
I just got a Rollei 35 B camera and have been trying to figure out the shutter speed compensation for the meter. I've found a manual for the Rollei B35 and it says that the dial is supposed to turn to select the shutter on the meter but on mine it won't turn. I'm probably missing something simple but I'd appreciate the help.
 
Firstly,
You have to have the lens extended before you can change shutter speed.
Also, the lens needs to be extended before you can wind the film on.

The plastic ring on the exposure meter, on the top plate should turn easily.
 
Firstly,
You have to have the lens extended before you can change shutter speed.
Also, the lens needs to be extended before you can wind the film on.

The plastic ring on the exposure meter, on the top plate should turn easily.

I figured it was supposed to turn easily but it isn't. Do I need to lift the ring up or anything?
 
I figured it was supposed to turn easily but it isn't. Do I need to lift the ring up or anything?

You do mean this ring on the top plate?

35b.jpg

You don't need to lift it or anything, it should just turn freely, with click-stops.
 
I would try a LITTLE bit of WD40 where the red arrow points, at the front end.
Don't let any get near the back end where the needle opening is.

35b-2.jpg
 
Thanks that broke it free now it turns freely when I use my fingernails but it seems like it loosening up even more. I appreciate the help!

You're very welcome.

That's a great little camera. Have fun.🙂
 
Back
Top Bottom