Schneider componon

M

mllanos1111

Well-known
Local time
10:27 AM
Joined
Jun 13, 2007
Messages
284
I just purchased a Schneider componon S for my Beseler and I purchased a new lens board with a leica mount.
The lens arrived but it looks like its missing a jam nut to mount it or is it?
The lens board is not threaded so I assume the person that sold it to me forgot to send the jam nut or do I have the wrong lens board?
 
mllanos1111 said:
Oh, where do I find one of those?
Click to expand...

Any camera shop that carries darkroom stuff should have a box of them. Virtualy all enlargers use them, they're a standard item and are not expensive...a couple dolars each.
 
Chriscrawfordphoto said:
Virtualy all enlargers use them
Click to expand...

Interesting... All enlargers I used so far had a threaded mount. My current one Saunders/LPL C6600 has m39 mounting. Schneider Componon - S 50/2.8 I use for 35mm, is a very good lens, and there was no ring in a box. It came in plastic cap, card box and user manual booklet.
 
ed1k said:
Interesting... All enlargers I used so far had a threaded mount. My current one Saunders/LPL C6600 has m39 mounting. Schneider Componon - S 50/2.8 I use for 35mm, is a very good lens, and there was no ring in a box. It came in plastic cap, card box and user manual booklet.
Click to expand...

That's nice, wish my enlargers had been that way. I have a Beseler 23cII that I bought new around 1995, and an old Omega D2 and neither had threaded lensboards. I had to buy the retaining rings, they don't come with the lenses, at least not the Schneiders. I have 3 Componon-S lenses and all came in plastic bubble boxes like yours, without rings.
 
Mine came in the platic bubble case as well. I was just checking my El Nikkor and it had a threaded ring on it. So I thought I'd see if it fit the Schneider and it did!
I'm back in business! Thanks everyone for your help.
 
You must log in or register to reply here.
Back
Top Bottom